Brushless Motors BMU Series

BLM460SP-152

Print Product Information All at once
BLM460SP-152

Motor

  This product is currently no longer available for sale
Product Classification Product Name List Price List Price Shipping Date
Motor BLM460SP-152 SGD 270 USD 216 Discontinued Product
(31.3.2019 discontinued)
• This product is a motor only (combination type) . A combination of driver circuit and connection cable is required for driving.

Included

  • Motor: None
    Gearhead: Mounting Screws, Parallel Key

Specifications

Data Download

Other Specifications

General Specifications

Item Motor Driver
Insulation Resistance 100 MΩ or more when a 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.
 		 After continuous operation at normal ambient temperature and humidity, the value measured with a 500 VDC megger between the power supply terminal and the protective earth terminal, and between the power supply terminal and the I/O signal terminal is 100 MΩ min.
 
 
Dielectric Strength No abnormality is observed when 1.5 kVAC at 50 Hz applied between the coils and case for 1 minute after continuous operation under normal ambient temperature and humidity.
 
 		 After continuous operation at normal ambient temperature and humidity, no abnormality is observed even if 50 Hz, 1.5 kVAC is applied between the power supply terminal and the protective earth terminal, and 50 Hz, 1.5 kVAC is applied between the power supply terminal and the I/O signal terminal for 1 minute.
 
 
 
Temperature Rise  
 
After rated continuous operation at normal ambient temperature and humidity, the temperature rise of the coil measured value by the thermocouple method is max. 50 °C (max. 60 °C for 400 W), and the measured value of the temperature rise of the case surface is max. 40 °C (max. 50 °C for 400 W) *1.		 After continuous operation at normal ambient temperature and humidity, the measurement value of the temperature rise of the heat sink is 50 °C max. using the thermocouple method.
 
Operating Environment Ambient Temperature 0~+40°C (Non-freezing) 0~+40°C (Non-freezing)
0~+40°C (Non-freezing) [0~+35 °C (non-freezing) only when the front side of the 400 W type driver is installed facing upward.
 
The front side of the driver is the side with the display and setting dials.]
Ambient Humidity 85 % max. (Non-condensing)
Altitude Up to 1000 m above sea level
Atmosphere No corrosive gases or dust Cannot be used in a radioactive area, magnetic field, vacuum, or other special environments.
Vibration Not subject to continuous vibration or excessive shock In conformance with JIS C 60068-2-6, "Sine-wave vibration test method"
Frequency Range: 10~55 Hz, Half Amplitude: 0.15 mm, Sweep Direction: 3 directions (X, Y, Z), Number of Sweeps: 20 times
Storage Conditions*2 Ambient Temperature -20~+70°C (Non-freezing) -20~+70°C (Non-freezing)
Ambient Humidity 85 % max. (Non-condensing)
Altitude Up to 3000 m above sea level
Thermal Class Standard Type (IP40 rating), IP65 Rating: UL/CSA Standards 105 (A), EN Standards 120 (E) −
Degree of Protection *3
Standard Type (IP40 rating):
IP40
IP65 Rating:
IP65 (Excluding the installation surface of the round shaft type and connectors)
 IP20
*1
Attach round shaft types to a heat sink (Material: aluminum) of one of the following sizes to maintain a motor case surface temperature of 90 °C max.
30 W Type: 115×115 mm, 5 mm thickness, 60 W Type: 135×135 mm, 5 mm thickness, 120 W Type: 165×165 mm, 5 mm thickness,
200 W Type: 200×200 mm, 5 mm thickness, 400 W Type: 250×250 mm, 6 mm thickness
*2
The value for storage condition applies to short periods such as the period during transport.
*3
The IP indication that shows the watertight and dust-resistant performance are specified under IEC 60529 and IEC 60034-5.

Note

  • Do not measure insulation resistance or perform a dielectric strength test the motor and driver are connected.

Motor Material and Surface Treatment

Materials
Case: Aluminum
Output Shaft: Standard Type (IP40 rating), IP65 Rating: S45C
Screw: Stainless Steel (externally exposed parts only. protective earth terminal excluded)
Surface Treatment
Case: Painted (except for mounting surface)

Permissible Radial Load and Permissible Axial Load

Parallel Shaft Gearhead

Output Gear Ratio Permissible Radial Load Permissible Axial Load
N
10 mm From the End of the Output Shaft
N		 20 mm From the End of the Output Shaft
N
30 W 5 At 80~3000 r/min 100 150 40
At 4000 r/min 90 110
10, 15, 20 At 80~3000 r/min 150 200
At 4000 r/min 130 170
30, 50, 100, 200 At 80~3000 r/min 200 300
At 4000 r/min 180 230
60 W 5 At 80~3000 r/min 200 250 100
At 4000 r/min 180 220
10, 15, 20 At 80~3000 r/min 300 350
At 4000 r/min 270 330
30, 50, 100, 200 At 80~3000 r/min 450 550
At 4000 r/min 420 500
120 W 5 At 80~3000 r/min 300 400 150
At 4000 r/min 230 300
10, 15, 20 At 80~3000 r/min 400 500
At 4000 r/min 370 430
30, 50, 100, 200 At 80~3000 r/min 500 650
At 4000 r/min 450 550
200 W
300 W
400 W		 5, 10, 15, 20 At 80~3000 r/min 550 800 200
At 4000 r/min 500 700
30, 50 At 80~3000 r/min 1000 1250 300
At 4000 r/min 900 1100
100*, 200* At 80~3000 r/min 1400 1700 400
At 4000 r/min 1200 1400
  • *Gear ratio 100 is available for 200 W and 300 W output power types.
    The gear ratio 200 is only available for the 200 W output power type (except for watertight and dust-resistant specifications).
Parallel Shaft Gearhead

Hollow Shaft Flat Gearhead

Output Gear Ratio Permissible Radial Load Permissible Axial Load
N
10 mm From Mounting Surface
N		 20 mm From Mounting Surface
N
30 W 5, 10 At 80~3000 r/min 450 370 200
At 4000 r/min 410 330
15, 20, 30, 50,
100, 200		 At 80~3000 r/min 500 400
At 4000 r/min 460 370
60 W 5, 10 At 80~3000 r/min 800 660 400
At 4000 r/min 730 600
15, 20, 30, 50,
100, 200		 At 80~3000 r/min 1200 1000
At 4000 r/min 1100 910
120 W 5, 10 At 80~3000 r/min 900 770 500
At 4000 r/min 820 700
15, 20 At 80~3000 r/min 1300 1110
At 4000 r/min 1200 1020
30, 50, 100, 200 At 80~3000 r/min 1500 1280
At 4000 r/min 1400 1200
200 W
300 W
400 W		 5*, 10 At 80~3000 r/min 1230 1070 800
At 4000 r/min 1130 990
15, 20 At 80~3000 r/min 1680 1470
At 4000 r/min 1550 1360
30, 50, 100 At 80~3000 r/min 2040 1780
At 4000 r/min 1900 1660
  • *400W Type only

About Load Position

Load Position Illustration_FR

Round Shaft Type

Output Permissible Radial Load Permissible Axial Load
N
10 mm From the End of the Output Shaft
N		 20 mm From the End of the Output Shaft
N
30 W
60 W		 80 100 20
120 W
200 W
300 W
400 W		 150 170 25

Permissible Radial Load Calculation

The formula for calculating the permissible radial load varies depending on the mechanism.

When One Side of the Load Shaft is Not Supported by the Bearing Unit

The radial load is the most difficult mechanism. A Stepped Type Load Shaft is recommended.

Radial Load
F0 [N]:
Permissible Radial Load at the Flange-Mounting Surface Position
Lp [mm]:
Distance from Flange-Mounting Surface to Radial Load Point
B [mm]:
Distance from Flange-Mounting Surface to Bearing Unit
Product Name Permissible Radial Load W [N]
GFS2G□FR
\(\begin{align} \mathrm{W} [\mathrm{N}] = \frac{36}{36 + \mathrm{Lp}} \times \mathrm{F}_0 [\mathrm{N}] \end{align}\)
GFS4G□FR
\(\begin{align} \mathrm{W} [\mathrm{N}] = \frac{40}{40 + \mathrm{Lp}} \times \mathrm{F}_0 [\mathrm{N}] \end{align}\)
GFS5G□FR
\(\begin{align} \mathrm{W} [\mathrm{N}] = \frac{50}{50 + \mathrm{Lp}} \times \mathrm{F}_0 [\mathrm{N}] \end{align}\)
GFS6G□FR
\(\begin{align} \mathrm{W} [\mathrm{N}] = \frac{60}{60 + \mathrm{Lp}} \times \mathrm{F}_0 [\mathrm{N}] \end{align}\)

When Supporting One Side of the Load Shaft with the Bearing Unit

Radial Load
Product Name Permissible Radial Load W [N]
GFS2G□FR
GFS4G□FR
GFS5G□FR
GFS6G□FR
\(\begin{align} \mathrm{W} [\mathrm{N}] = \frac{\mathrm{B}}{\mathrm{B} - \mathrm{Lp}} \times \mathrm{F}_0 [\mathrm{N}] \end{align}\)
Product Name Rotation Speed Gear Ratio F0 [N]
GFS2G□FR At 80~3000 r/min 5, 10 570
15~200 630
At 4000 r/min 5, 10 520
15~200 580
GFS4G□FR At 80~3000 r/min 5, 10 1000
15~200 1500
At 4000 r/min 5, 10 910
15~200 1370
GFS5G□FR At 80~3000 r/min 5, 10 1080
15, 20 1550
30~200 1800
At 4000 r/min 5, 10 980
15, 20 1430
30~200 1680
GFS6G□FR At 80~3000 r/min 5, 10 1430
15, 20 1960
30~100 2380
At 4000 r/min 5, 10 1320
15, 20 1810
30~100 2210
Data Download
Print Product Information All at once
close