Technical Report RENGA
Since the first issue of RENGA was published in March 1966, this Technical Report has provided customers with useful technical information, as well as information on Oriental Motor's research and development activities. (Report format)
[Meaning of RENGA]
Bricks, “renga” in Japanese, have been used in buildings since the time of ancient Mesopotamia.
The fact that it is still in use today, after 6000 years, tells us that it is a highly standardized and progressive material.
Oriental Motor named this technical journal "RENGA" because Oriental Motor's products and parts are highly standardized and because some of Oriental Motor's buildings are made of bricks.
List
You can narrow down the themes you want to browse by product category.
Select by Product Category
October 17, 2024 NEW
Development of the AZX Series Servo Motors Equipped with ABZO Sensor
This article explains the features of the AZX Series, as well as the heat separation design and heat dissipation structure change made to the motor and driver to handle increased heat generation due to higher output power.
June 9, 2023
High-Torque Technology for Stepper Motors Using Hybrid Type Radial Induction
The principle of high-torque technology will be explained, and the effect of shortening positioning time and reduction of loss and leakage flux will be compared with existing products.
December 28, 2022
Brushless Motors Contribute to Carbon Neutrality
The effect of reducing power consumption by high efficiency motors is verified using an efficiency map, using variable speed drive of a conveyor with variable operating points as an example.
August 19, 2022
Development of Robot Controller MRC01 and Example of Introducing Robot to Equipment
We have developed a controller that can control robots of various structures, made in-house. We introduce product features and technologies.
April 28, 2022
Concentric Shaft Gear Development of Parallel Shaft Gear Reduction Mechanism
This is a concentric shaft gear with a new structure that has a much higher permissible torque and permissible radial load by increasing the size of the gears and bearings for the same frame size.