Electromagnetic Brake Motors KII Series (New standard)

2RK6GV-JCM

2RK6GV-JCM

Motor

Product Classification Product Name List Price List Price Shipping Date
Motor 2RK6GV-JCM SGD 201 USD 161 16 Working Days
• This product is a motor only (pinion shaft type). A combination of gearhead is required for driving.
• Specifications and various data of combination products may be shown on the combination product page. Please check the page of the combination product.

Included

  • Motor : Capacitor, Capacitor Cap, Operating Manual

Specifications

Dimensions

Capacitor
Capacitor

Capacitor

Data Download

Other Specifications

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise A gearhead or equivalent heat sink*1 is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class 130 (B)
Overheat Protective Device The 6 W type is impedance protected
Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C
Operating Ambient Temperature Three-phase 200 V, Single-phase 100 V, Single-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C.
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection
Terminal box type:
IP66*2 (Excluding mounting surface of the round shaft type)
IP20 (60 W, 90 W)
Lead wire type:
IP20 (6 W, 15 W, 25 W)
Cable Type:
IP40 (40 W)
IP20 (60 W, 90 W)
*1
Heat Sink Size (Material: Aluminum)
Motor Type
(Output)
Size
(mm)
Thickness
(mm)
6 W Type 115 x 115 5
15 W Type 125 x 125
25 W Type 135 x 135
40 W Type 165 x 165
60 W, 90 W Type 200 x 200
*2
For Materials and Surface Treatments
Type Output Power Materials Surface Treatment
Parallel shaft Combination
Round Shaft
40 W Motor case, terminal box: Aluminum
Output shaft: S45C
Screws: Stainless steel (externally facing screws only)
Motor case,
terminal box: Painted (excluding installation surface)

Standards

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

close
close
close