Electromagnetic Brake Motors

2IK6SMB-5S

2IK6SMB-5S

Combi geared motor

Product Classification Product Name List Price List Price Shipping Date
Combi geared motor 2IK6SMB-5S SGD 502 USD 402 11 Working Days

Included

  • Motor : None
    Gearhead : Mounting Screws

Specifications

Characteristics

Starting and Braking Characteristics (Reference values)
Starting and Braking Characteristics (Reference values)

Starting and Braking Characteristics (Reference values)

Dimensions

Motor/Gearhead
Motor/Gearhead

Motor/Gearhead

Data Download

Other Specifications

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength No abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the coils and the case for 1 minute after rated operation at normal ambient temperature and humidity.
Temperature Rise A gearhead or equivalent heat sink* is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class 130 (B)
Overheat Protective Device 6 W Type: Impedance protection
Other Types: Built-in thermal protector (automatic return type) Open: 130 ± 5 °C, Return: 90 ± 15 °C (40 W Type: 82 ± 15 ℃)
Operating Ambient Temperature Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection IP65 (excluding mounting surface of the round shaft type)
  • *Heat sink size (Material: Aluminum)
Motor Type (Output power) Size (mm)  Thickness (mm)
6 W Type 115 x 115 5
15 W Type 125 x 125
25 W Type 135 x 135
40 W Type 165 x 165

Permissible Radial Load and Permissible Axial Load of Gearhead

Product Name Gear Ratio Maximum Permissible Torque
N·m
Permissible Radial Load N Permissible Axial Load
N
From Shaft End
10 mm
From Shaft End
20 mm
2GN□S 3~18 3.0 50 80 30
25~180 120 180
3GN□S 3~18 5.0 80 120 40
25~180 150 250
4GN□S 3~18 8.0 100 150 50
25~180 200 300
5GN□S 3~18 10 250 350 100
25~180 300 450
Radial Load and Axial Load

Standards

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

System Configuration

System Configuration

Cables and Accessories

You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.

close
close
close