Induction Motors

2IK6AB-6S

2IK6AB-6S

Combi geared motor

Product Classification Product Name List Price List Price Shipping Date
Combi geared motor 2IK6AB-6S SGD 214 USD 171 11 Working Days

Included

  • Motor : Capacitor, Capacitor Cap
    Gearhead : Mounting Screws

Specifications

Dimensions

Motor/Gearhead
Motor/Gearhead

Motor/Gearhead

Capacitor
Capacitor

Capacitor

Data Download

Other Specifications

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise A gearhead or equivalent heat sink* connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class 130(B)
Overheat Protective Device The 6 W type is impedance protected
Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 82 ± 15 °C
Three-Phase 15 W Type Open: 130 ± 5 °C, Return: 90 ± 15 °C
Operating Ambient Temperature Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection IP65 (Excluding mounting surface of the round shaft type)
  • *Heat Sink Size (Material: Aluminum)
Motor Type (Output power) Size (mm)  Thickness (mm)
6 W Type 115 x 115 5
15 W Type 125 x 125
25 W Type 135 x 135
40 W Type 165 x 165

Permissible Radial Load and Permissible Axial Load of Gearhead

Product Name Gear Ratio Maximum Permissible Torque
N·m
Permissible Radial Load N Permissible Axial Load
N
From Shaft End
10 mm
From Shaft End
20 mm
2GN□S 3~18 3.0 50 80 30
25~180 120 180
3GN□S 3~18 5.0 80 120 40
25~180 150 250
4GN□S 3~18 8.0 100 150 50
25~180 200 300
5GN□S 3~18 10 250 350 100
25~180 300 450
Radial Load and Axial Load

Standards

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

System Configuration

System Configuration

Related Products

Brake Pack

Products Features
SB50W Series
SB50W Series
Features

This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.
 
This brake pack can increase the safety of equipment through the thermal protector open detection function.
 
In addition, alarm resetting by external signals is now possible, making it easier to use.
 

  • Supports Wide Voltage Range (100-230 VAC)
  • 48 mm × 48 mm DIN size
  • Conforms to Safety Standards
  • Compatible with 1 W~90 W Motors
  • Can Switch Sink/Source Logic

Cables and Accessories

You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.

close
close
close