Oriental Motor Asia Pacific Pte. Ltd. > Service > Motor Selection Service > Belt and Pulley Selection Condition Entry
Selection of Mechanism >  Selection Condition Entry  > Customer Information Entry > Contents Confirmation > Completed
Motor Selection Service

Belt and Pulley

Belt and Pulley

Load and Guide


 Load total mass: m 1 = kg 

Friction coefficient of the guide and belt: μ=  
  * (In other case) Friction coefficient  
  (Enter the material of the guide if the coefficient is unknown.)  

Specifications of Belt Pulley


 Belt mass: m 2 = kg 

Drive pulley pitch circle diameter: DP = mm (Enter diameter if the pitch circle is unknown) 

Drive pulley mass: m P = kg/unit 

Only when the mass is unknown

Drive pulley inner diameter: D Pi = mm 
Drive pulley width (thickness): L P = mm 
Drive pulley material  
* Other contents  

Number of pulley: n= pulleys 

External Force


FA = N (1kgf=9.8N) 

Connecting Belt Pulley or Gear (Not necessary if a direct connection).


 Primary pulley (gear) pitch circle radius or diameter  
Secondary pulley (gear) pitch circle radius or diameter
D P1 = mm  D P2 = mm 
Primary pulley (gear) mass Secondary pulley (gear) mass
m P1 = kg  m P2 = kg 

Only when the mass is unknown

Primary pulley (gear) width (thickness)
L P1 = mm 
Primary pulley (gear) material
 
* (In other case) Material
 

Only when the mass is unknown

Secondary pulley (gear) width (thickness)
L P2 = mm 
Secondary pulley (gear) material
 
* (In other case) Material
 

Mechanism Angle


 Mechanism inclination angle: α= deg 

Holding Force

If you need to hold the position after the power is turned off, you have to prepare a magnetic brake.
If you need to hold the position after stopping the mechanism but you need not to hold the position after the power is turned off.
Holding is not required.  

Operation Pattern (Select any one of patterns and enter the condition)

Constant Speed Operation Traveling Speed = mm/s Drive Time = s  
Speed Control Operation Traveling Speed = - mm/s Drive Time = s   
Positioning Operation (Enter your data in the following blank cells only when you need to specify your data.) 

Traveling Speed: V


  • Traveling Amount mm






  • Positioning Time: t 0 s

  • Stopping Time: t s s
   
When the acceleration and deceleration times are specified: t1= s 
When the traveling speed is specified: V= mm/s 

Stopping Accuracy


 Stopping Accuracy: ± mm 

Power Supply Voltage


 Choice of first priority Power Supply Voltage * (In other case) Voltage   
Frequency  

Choice of second priority Power Supply Voltage * (In other case) Voltage   
Frequency  

Others


 Your choice of motor(s)
AC Motor Speed Control Motor Stepping Motor
Servo Motor Others   
Your choice of controller (pulse generator)
(When you choose in the above step the stepping and servo motors)
Our controller Make use of the positioning function in the unit such as PLC or sequencer of other company
Unknown (Details are not known) 
When you choose our product, please enter its product name, and if you choose the product of other's please enter the name of other company and its product.
 

Application and Equipment Name  

Number of units to be used:  

Expected Purchasing Date: (Calendar year) (Month planned)  

Other information (e.g. your requests not covered by your request and your notes and not included in the above form.)
 


Return Next