Induction Motors KII Series (New standard)

3IK15A-EC

3IK15A-EC

Motor

Product Classification Product Name List Price List Price Shipping Date
Motor 3IK15A-EC SGD 84 USD 67 16 Working Days

Included

  • Motor : Capacitor, Capacitor Cap

Specifications

Dimensions

Motor
Motor

Motor

Capacitor
Capacitor

Capacitor

Data Download

Other Specifications

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise A gearhead or equivalent heat sink*1 is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class 130 (B)
Overheat Protective Device The 6 W type is impedance protected
Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C
Operating Ambient Temperature Three-phase 200 V, Single-phase 100 V, Single-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C.
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection
Lead wire type:
IP20
Terminal box type:
25 W, 40 W  IP66*2 (Excluding mounting surface of the round shaft type)
60 W, 90 W  IP54 (Excluding mounting surface of the round shaft type), 60 W JS type and GC type IP66*2 (Excluding mounting surface of the round shaft type)
*1
Heat Sink Size (Material: Aluminum)
Motor Type (Output Power) Size (mm) Thickness (mm)
6 W Type 115 x 115 5
15 W type 125 x 125
25 W type 135 x 135
40 W Type 165 x 165
60 W, 90 W type 200 x 200
*2
For Materials and Surface Treatments
Terminal box type: IP66
Type Output Power Materials Surface Treatment
Parallel Shaft Combination
Round Shaft
25 W, 40 W,
60 W (JS type, GC type)
Motor case, terminal box: Aluminum
Output shaft: S45C
Screws: Stainless steel (externally facing screws only)
Motor case, terminal box: Painted (excluding mounting surface)
Stainless Steel Shaft Parallel shaft Combination round shaft 25 W, 40 W,
60 W (GC type)
Motor case, terminal box: Aluminum
Output shaft: SUS303
Screws: Stainless steel (externally facing screws only)
Motor case, terminal box: Painted (excluding mounting surface)

Permissible Radial Load and Permissible Axial Load of Round Shaft

Product Name Permissible Radial Load N Permissible Axial Load
Distance From the End of the Motor Output Shaft
10 mm 20 mm
2IK6
2RK6
50 110 Half of the motor mass or less*
3IK15
3RK15
40 60
4IK25
4RK25
90 140
5IK40
5RK40
140 200
5IK60
5IK90
5RK60
5RK90
240 270
  • * Avoid applying axial loads as much as possible.
    If an axial load is unavoidable, keep it at half or less of the motor mass.

Standards

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

System Configuration

System Configuration

Related Products

Brake Pack

Products Features
SB50W Series
SB50W Series
Features

This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.
 
This brake pack can increase the safety of equipment through the thermal protector open detection function.
 
In addition, alarm resetting by external signals is now possible, making it easier to use.
 

  • Supports Wide Voltage Range (100-230 VAC)
  • 48 mm × 48 mm DIN size
  • Conforms to Safety Standards
  • Compatible with 1 W~90 W Motors
  • Can Switch Sink/Source Logic

Cables and Accessories

You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.

close
close
close