Induction Motors KII Series (New standard)

2IK6UA-900

2IK6UA-900

Combi geared motor

  This product is currently no longer available for sale
Product Classification Product Name List Price List Price Shipping Date
Combi geared motor 2IK6UA-900 SGD 271 USD 217 Discontinued Product
(31.3.2024 discontinued)

Included

  • Motor, Gearhead, Capacitor, Capacitor Cap, Installation Screws, Parallel Key, Operating Manual

Specifications

Dimensions

Capacitor
Capacitor

Capacitor

Data Download

Other Specifications

General Specifications

Item Specifications
Insulation Resistance After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise A gearhead or equivalent heat sink*1 is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class 130 (B)
Overheat Protective Device The 6 W type is impedance protected
Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C
Operating Ambient Temperature Three-phase 200 V, Single-phase 100 V, Single-phase 200 V: -10~+50 °C (Non-freezing)
Other voltages: -10~+40 °C (Non-freezing)
For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C.
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection
Lead wire type:
IP20
Terminal box type:
25 W, 40 W  IP66*2 (Excluding mounting surface of the round shaft type)
60 W, 90 W  IP54 (Excluding mounting surface of the round shaft type), 60 W JS type and GC type IP66*2 (Excluding mounting surface of the round shaft type)
*1
Heat Sink Size (Material: Aluminum)
Motor Type (Output Power) Size (mm) Thickness (mm)
6 W Type 115 x 115 5
15 W type 125 x 125
25 W type 135 x 135
40 W Type 165 x 165
60 W, 90 W type 200 x 200
*2
For Materials and Surface Treatments
Terminal box type: IP66
Type Output Power Materials Surface Treatment
Parallel Shaft Combination
Round Shaft
25 W, 40 W,
60 W (JS type, GC type)
Motor case, terminal box: Aluminum
Output shaft: S45C
Screws: Stainless steel (externally facing screws only)
Motor case, terminal box: Painted (excluding mounting surface)
Stainless Steel Shaft Parallel shaft Combination round shaft 25 W, 40 W,
60 W (GC type)
Motor case, terminal box: Aluminum
Output shaft: SUS303
Screws: Stainless steel (externally facing screws only)
Motor case, terminal box: Painted (excluding mounting surface)

Permissible Radial Load and Permissible Axial Load of Gearhead

Product Name Gear Ratio Maximum Permissible Torque
N·m
Permissible Radial Load N Permissible Axial Load
N
Distance from the End of the Gearhead Output Shaft
10 mm 20 mm
2GV□
2GV□B
2 6 100 150 15
3 100 150 30
5~25 150 200 40
30~360 200 300
2GV□B 500~3600 200 300
3GV□
3GV□B
2 10 150 250 20
3 150 250 40
5~25 200 300 80
30~360

300

400
3GV□B 500~3600 300 400
4GV□
4GV□B
2 16 300 350 25
3 300 350 50
5~25 300 350 100
30~360 450 550
4GV□B 500~3600 450 550
5GV□
5GV□B
5GVH□
5GVH□B
5GVH□BS
5GVH□BSF
2 30 250 350 100
3~9 400 500 150
12.5~18 450 600
25~300 500 700
5GV□B 360~3000 500 700
5GVR□
5GVR□B
2 40 250 350 100
3~9 400 500 150
12.5~18 450 600
25~180 500 700
7GV□B 5~20 70 700 850 200
30~100 1400 1700 400

System Configuration

System Configuration

Related Products

Brake Pack

Products Features
SB50W Series
SB50W Series
Features

This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.
 
This brake pack can increase the safety of equipment through the thermal protector open detection function.
 
In addition, alarm resetting by external signals is now possible, making it easier to use.
 

  • Supports Wide Voltage Range (100-230 VAC)
  • 48 mm × 48 mm DIN size
  • Conforms to Safety Standards
  • Compatible with 1 W~90 W Motors
  • Can Switch Sink/Source Logic

Cables and Accessories

You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.

close
close