Specifications

Dimensions

Motor/Gearhead

Motor/Gearhead

Capacitor

Capacitor

Data Download

Other Specifications

General Specifications

Item	Specifications
Insulation Resistance	After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength	After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute.
Temperature Rise	A gearhead or equivalent heat sink*1 is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.)
Thermal Class	130 (B)
Overheat Protective Device	The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C
Operating Ambient Temperature	Three-phase 200 V, Single-phase 100 V, Single-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C.
Operating Ambient Humidity	85 % max. (Non-condensing)
Degree of Protection	Lead wire type: IP20 Terminal box type: 25 W, 40 W  IP66*2 (Excluding mounting surface of the round shaft type) 60 W, 90 W  IP54 (Excluding mounting surface of the round shaft type), 60 W JS type and GC type IP66*2 (Excluding mounting surface of the round shaft type)

*1

Heat Sink Size (Material: Aluminum)

Motor Type (Output Power)	Size (mm)	Thickness (mm)
6 W Type	115 x 115	5
15 W type	125 x 125
25 W type	135 x 135
40 W Type	165 x 165
60 W, 90 W type	200 x 200

*2

For Materials and Surface Treatments
Terminal box type: IP66

Type		Output Power	Materials	Surface Treatment
Parallel Shaft Combination Round Shaft		25 W, 40 W, 60 W (JS type, GC type)	Motor case, terminal box: Aluminum Output shaft: S45C Screws: Stainless steel (externally facing screws only)	Motor case, terminal box: Painted (excluding mounting surface)
Stainless Steel Shaft	Parallel shaft Combination round shaft	25 W, 40 W, 60 W (GC type)	Motor case, terminal box: Aluminum Output shaft: SUS303 Screws: Stainless steel (externally facing screws only)	Motor case, terminal box: Painted (excluding mounting surface)

Permissible Radial Load and Permissible Axial Load of Gearhead

Product Name	Gear Ratio	Maximum Permissible Torque N·m	Permissible Radial Load N		Permissible Axial Load N
			Distance from the End of the Gearhead Output Shaft
			10 mm	20 mm
2GV□ 2GV□B	2	6	100	150	15
	3		100	150	30
	5~25		150	200	40
	30~360		200	300
2GV□B	500~3600		200	300
3GV□ 3GV□B	2	10	150	250	20
	3		150	250	40
	5~25		200	300	80
	30~360		300	400
3GV□B	500~3600		300	400
4GV□ 4GV□B	2	16	300	350	25
	3		300	350	50
	5~25		300	350	100
	30~360		450	550
4GV□B	500~3600		450	550
5GV□ 5GV□B 5GVH□ 5GVH□B 5GVH□BS 5GVH□BSF	2	30	250	350	100
	3~9		400	500	150
	12.5~18		450	600
	25~300		500	700
5GV□B	360~3000		500	700
5GVR□ 5GVR□B	2	40	250	350	100
	3~9		400	500	150
	12.5~18		450	600
	25~180		500	700
7GV□B	5~20	70	700	850	200
	30~100		1400	1700	400

System Configuration

Related Products

Brake Pack

Products	Features
SB50W Series	Features	This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.   This brake pack can increase the safety of equipment through the thermal protector open detection function.   In addition, alarm resetting by external signals is now possible, making it easier to use.   Supports Wide Voltage Range (100-230 VAC) 48 mm × 48 mm DIN size Conforms to Safety Standards Compatible with 1 W~90 W Motors Can Switch Sink/Source Logic

Cables and Accessories

You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.

Data Download

• Specifications
• Dimensions
• Data Download
• Other Specifications
• System Configuration
• Related Products
• Cables and Accessories

Print Product Information All at once