Induction Motors KII Series (New standard)
2IK6GV-UA
Motor
| Product Classification | Product Name | List Price | List Price | Shipping Date |
|---|---|---|---|---|
| Motor | 2IK6GV-UA | SGD 75 | USD 60 | 16 Working Days |
• Specifications and various data of combination products may be shown on the combination product page. Please check the page of the combination product.
Included
- Motor : Capacitor, Capacitor Cap, Operating Manual
Specifications
Dimensions
Data Download
Other Specifications
General Specifications
| Item | Specifications |
|---|---|
| Insulation Resistance | After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger. |
| Dielectric Strength | After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute. |
| Temperature Rise | A gearhead or equivalent heat sink*1 is connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.) |
| Thermal Class | 130 (B) |
| Overheat Protective Device | The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 85 ± 20 °C |
| Operating Ambient Temperature | Three-phase 200 V, Single-phase 100 V, Single-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) For gearhead gear ratios 2 or 3 the lower temperature limit is 0 °C. |
| Operating Ambient Humidity | 85 % max. (Non-condensing) |
| Degree of Protection |
Lead wire type:
IP20
Terminal box type:
25 W, 40 W IP66*2 (Excluding mounting surface of the round shaft type)
60 W, 90 W IP54 (Excluding mounting surface of the round shaft type), 60 W JS type and GC type IP66*2 (Excluding mounting surface of the round shaft type) |
- *1
- Heat Sink Size (Material: Aluminum)
| Motor Type (Output Power) | Size (mm) | Thickness (mm) |
|---|---|---|
| 6 W Type | 115 x 115 | 5 |
| 15 W type | 125 x 125 | |
| 25 W type | 135 x 135 | |
| 40 W Type | 165 x 165 | |
| 60 W, 90 W type | 200 x 200 |
- *2
- For Materials and Surface Treatments
Terminal box type: IP66
| Type | Output Power | Materials | Surface Treatment | |
|---|---|---|---|---|
| Parallel Shaft Combination Round Shaft |
25 W, 40 W, 60 W (JS type, GC type) |
Motor case, terminal box: Aluminum Output shaft: S45C Screws: Stainless steel (externally facing screws only) |
Motor case, terminal box: Painted (excluding mounting surface) | |
| Stainless Steel Shaft | Parallel shaft Combination round shaft | 25 W, 40 W, 60 W (GC type) |
Motor case, terminal box: Aluminum Output shaft: SUS303 Screws: Stainless steel (externally facing screws only) |
Motor case, terminal box: Painted (excluding mounting surface) |
Standards
Regulations and Standards Materials
Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)
Explanations of the Global Laws, Regulations and Standards can be found here.
Information about our compliance with safety standards for each of our product models can be found here.
Hazardous Substances
The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).
Cables and Accessories
You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.
close
close
close