Induction Motors
2IK6FB-25S
Combi geared motor
Product Classification | Product Name | List Price | List Price | Shipping Date |
---|---|---|---|---|
Combi geared motor | 2IK6FB-25S | SGD 223 | USD 178 | 11 Working Days |
Included
- Motor : Capacitor, Capacitor Cap
Gearhead : Mounting Screws
Specifications
Dimensions
Data Download
Other Specifications
General Specifications
Item | Specifications |
---|---|
Insulation Resistance | After rated operation at normal ambient temperature and humidity, the measurement between the coils and the case is 100 MΩ min. using a 500 VDC megger. |
Dielectric Strength | After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kV at 50 Hz or 60 Hz between the coils and the case for 1 minute. |
Temperature Rise | A gearhead or equivalent heat sink* connected to the motor and the winding temperature rise is measured at 80 °C max. using the resistance change method after continuous rated operation under normal ambient temperature and humidity. (Three-Phase type is 70 °C max.) |
Thermal Class | 130(B) |
Overheat Protective Device | The 6 W type is impedance protected Other types: Built-in thermal protector (Automatic return type) Open: 130 ± 5 °C, Return: 82 ± 15 °C Three-Phase 15 W Type Open: 130 ± 5 °C, Return: 90 ± 15 °C |
Operating Ambient Temperature | Single-phase 100 V, single-phase 200 V, three-phase 200 V: -10~+50 °C (Non-freezing) Other voltages: -10~+40 °C (Non-freezing) |
Operating Ambient Humidity | 85 % max. (Non-condensing) |
Degree of Protection | IP65 (Excluding mounting surface of the round shaft type) |
- *Heat Sink Size (Material: Aluminum)
Motor Type (Output power) | Size (mm) | Thickness (mm) |
---|---|---|
6 W Type | 115 x 115 | 5 |
15 W Type | 125 x 125 | |
25 W Type | 135 x 135 | |
40 W Type | 165 x 165 |
Permissible Radial Load and Permissible Axial Load of Gearhead
Product Name | Gear Ratio | Maximum Permissible Torque N·m |
Permissible Radial Load N | Permissible Axial Load N |
|
---|---|---|---|---|---|
From Shaft End 10 mm |
From Shaft End 20 mm |
||||
2GN□S | 3~18 | 3.0 | 50 | 80 | 30 |
25~180 | 120 | 180 | |||
3GN□S | 3~18 | 5.0 | 80 | 120 | 40 |
25~180 | 150 | 250 | |||
4GN□S | 3~18 | 8.0 | 100 | 150 | 50 |
25~180 | 200 | 300 | |||
5GN□S | 3~18 | 10 | 250 | 350 | 100 |
25~180 | 300 | 450 |
Standards
Regulations and Standards Materials
Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)
Explanations of the Global Laws, Regulations and Standards can be found here.
Information about our compliance with safety standards for each of our product models can be found here.
Hazardous Substances
The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).
System Configuration
Related Products
Brake Pack
Products | Features | |
---|---|---|
SB50W Series |
Features |
This is a brake pack that enables instantaneous stopping, bidirectional rotation, and brake control of the motor, all in 1 unit.
|
Cables and Accessories
You can add it to "Quote and Purchase at the Online Shop" by checking the product name column.