sg  

Top > MEXE02
Support Software download

Programming data for controller can be set and edited using computer.

A dedicated cable is needed for the controller and computer to communicate.

MEXE02

Applicable product

Product Category
Series
Function
Data Setting
Monitoring
teaching
I/O
waveform
Speed Control Motor
BLE2 Series
BXII Series (Position Control Mode)
BXII Series (Speed Control Mode)
×
BLE Series
×
Stepping Motor
AZ Series
ARL Series
(Except Pulse Input type)
×
×
×
AR Series Pulse Input Type
×
AR Series
(Pulse Input Type Outside)
RKII Series FLEX
(Built-in Controller Type)
CRK Series FLEX
(Built-in Positioning Type)
AC Servo Motor
NX Series
×
Network Converter
NETC01-CC
NETC01-M2
NETC01-M3
×
×
Electric Module equipped αSTEP
EAS Series
Built-in Controller Type
EAS Series
Input Pulse Type
×
EAC Series FLEX
Pulse Input Type
EAC Series
Pulse Input Type
×
Hollow rotating platform
DGII Series FLEX
Built-in Controller Type
DGII Series Pulse Input Type
×

Download

◆Data Setting Software MEXE02

VersionApplicable Operating SystemsLanguageFile Size
Ver.3.41 Microsoft Window 10
Window 8.1
Window 8
Japanese
30.3MB
Windows 7
Windows Vista
Windows XP
Japanese
83.2MB
Ver.3.41 Micosoft Window 10
Window 8.1
Window 8
English 24.9MB
Windows 7
Windows Vista
Windows XP
English
74.6MB

・If Microsoft.NET Framework 2.0 Service Pack 2 (in Windows 7/Vista) is already installed, software can be installed directly.

Software revision

VersionUpgradedContents
Ver. 3.41 November 2016 Windows 10 Support
Ver. 3.33 June 2016 Applicable to the latest firmware of AZ series.
Operation stability improvement.
Ver. 3.31 January 2016 It is in multi-lingual languages.
Corresponds to the new product.
1)αSTEP AZ Series equipped EZSH series
2) αSTEP AZ Series equipped DRS2 series
Ver. 3.12 October 2014 Corresponding to the latest firmware of the AZ Series

◆Drivers

VersionApplicable Operating SystemsFile Size
Ver.6.4 Windows XP
Windows Vista
Windows 7
4.5MB
Ver.6.3a Windows 2000 1.3MB

・Drivers for dedicated communication cable

Note

  • Software is in ZIP compression format.
  • Please confirm if the file downloaded is the same size as indicated on the website.
  • If the file size does not match, kindly delete the file and download again.

Installation of software

Any existing MEXE02 programme in the computer must be uninstalled before proceeding to installation of the programme.

  • Run the installer as Windows administrator
  • The ZIP file can be saved to any folder.
  • Uncompress ZIP file, double click「Setup.exe」to start step by step installation.

Uninstall

During the uninstallation process, please follow the manual.

Version upgrade

Uninstall MEXE02 (if any) before installing the new version of MEXE02.
(Current software version can be checked using 'Version')

Recommended Operating Environment

Operating Systems
The following Operating Systems can support 32-bit and 64-bit:
Microsoft Windows 10
Microsoft Windows 8.1
Microsoft Windows 8
Microsoft Windows 7 Service Pack 1
Microsoft Windows Vista Service Pack 2
Microsoft Windows XP · Service Pack 3 ※ 2
CPU ※2 Intel Core Processor 2GHz and above (Applicable Operating Systems)
Display XGA(1024×768) and above
Memory 32-bit (x86): 1GB and above
64-bit (x64): 2GB and above
Hard Disk※3 30MB and above of free space
Interface USB1.1 1 port
※1
32-bit (x86) system only.
※2
Minimum requirement to meet Operating Systems condition.
※3
MEXE02 needs Microsoft .NET Framework 2.0 Service Pack 2.
It will be installed automatically if it is not found (500MB hard disk space is needed).
◆Important
Required disk space and memory differs accordingly to the operating system used.