sg  

Top > Service > Support Software MEXE02
You can set and edit operation data and each parameter by a computer. Besides, it can do teaching and monitoring a condition of each model. A communication cable is required for connecting a applicable product and a computer.
*Take note
Depending on the applicable product, available functions and types of communication cable may differ. If you are using products or software for the first time, do check here before downloading the software.
Functional test


Operation data setting

You can easily set operation data on a computer. Besides, it can save the data setting, so when you exchange a driver,
you forward the saved data. It will be the same setting.

Only AZ Series can use unit system setting wizard

Please see the details from here.
Test function

This function can confirm the connection with the above system and operate motor itself.

The Start up

I/O Test

You can monitor input signals and cause output signals to be output forcibly.
This function is convenient if you want to check the wire connection of
physical I/O with the programmable controller and the operation of network I/O.

Teaching/Remote operation

A motor can be operated using the MEXE02 Software. This function allows you
check how the motor will operate before actually connecting it to
a programmable controller, so shorter time of starting up device.
Monitor/Editing function


Installed various monitor functions for confirmation such as operation condition.
Shortcut of start up of device/ adjustment time by using properly each scene.

I/O Monitor

You can monitor the current status of an applicable product and the ON/OFF
status of I/O signals. You can use for checking I/O after connecting wire
and at operation.

Waveform monitor

You can confirm the current status of operation like an oscilloscope
(instruction speed, load ratio etc.). You can use for start up device and adjustment.

When errors and problems

Alarm monitor

Using the alarm monitor and the warning monitor, you can
check the cause of errors and problems of an applicable products.
You can smoothly manage errors and problems.

Status monitor

At status monitor of AZ Series, you can monitor such as temperature
and load ratio of motor and driver and accumulated rotation number from the beginning of using.

Operating Environment

Operating system ※ 1

The following OS supports only 32-bit (x86) and 64-bit (x64) version.
· Microsoft Windows 10
· Microsoft Windows 8.1
· Microsoft Windows 8
· Microsoft Windows 7 Service Pack 1
· Microsoft Windows Vista Service Pack 2
Microsoft Windows XP · Service Pack 3 ※ 2

CPU ※ 3

Intel Core processor 2GHz or more (that corresponds to the OS)

Display

XGA (1024 × 768) or higher resolution video adapter and monitor

Memory

32-bit (x86) version: 1GB or more 64-bit (x64) version: 2GB or more

Hard disk ※ 4

60MB or more of free space

Serial interface

If you use the CC05IF-USB: USB1.1 1 port
if you use a USB cable: USB2.0 1 port
※ 1 Microsoft Windows 2000 is not supported.
※ 2 For Microsoft Windows XP x64 Edition, it will work with Service Pack 2.
※ 3 You must meet the operating conditions of the OS.
※ 4 The MEXE02, you must have Microsoft .NET Framework 4 Client Profile. Because if it is not installed, it will installed automatically,
It require 64-bit (x64) version of OS 1.5GB, free space of the case 600MB of 32-bit (x86) version of OS is required.
◆ important - Customer, depending on the system of the environment you're using, the capacity of the necessary memory
and hard disk is different.
If you want to install and use the media, you will need a drive that supports the media.
About communication cable
Communication cables have 2 types as below. Please confirm a cable type by applicable products communication cable.
When using the CC05IF-USB communication cable (sold separately) for data setting software
CC05IF-USB
When using a USB cable
Use a commercially available USB cable.
Standard USB2.0 (Full Speed)
Cable Length: 3m max
Speed Control Motor
Applicable product
https://www.orientalmotor.com.sg/service/softwaredl/mexe02/
Series nameProduct type (mode)Communication cable type
BLE2 series
Standard type USB cable
BLE Series
Standard type / with electromagnetic brake type CC05IF-USB
CC-Link Ver.1.1 correspondence
RS-485 communication type
BXII series
Position control mode
Speed ​​control mode
Stepping Motor
Applicable product
https://www.orientalmotor.com.sg/service/softwaredl/mexe02/
Series nameProduct typeCommunication cable type
AZ series Pulse train input type USB cable
Positioning function built-in type
AR Series Pulse train input type CC05IF-USB
Positioning function built-in type
DeviceNet correspondence
ARL series CC-Link Ver.1.1 correspondence
MECHATROLINK-II compatible
Positioning function built-in type
RKII series Positioning function built-in type
CRK Series Positioning function built-in type
PKA series Positioning function built-in type
Servo Motor
Applicable product
https://www.orientalmotor.com.sg/service/softwaredl/mexe02/
Series nameCommunication cable type
NX Series CC05IF-USB
Electric Sliders
Applicable product
https://www.orientalmotor.com.sg/service/softwaredl/mexe02/
Series name
Product type
Communication cable type
EAS series αSTEP AR series equipped
Pulse input type
CC05IF-USB
Built-in controller type
EAS series αSTEP AZ series equipped
Pulse train input type
USB cable
Built-in controller type
EZS series αSTEP AR series equipped
Pulse train input type
CC05IF-USB
Built-in controller type
EZS series αSTEP AZ series equipped
Pulse train input type
USB cable
Built-in controller type
EZS series cleanroom
αSTEP AR series equipped
Pulse input type
CC05IF-USB
Built-in controller type
EZS series cleanroom
αSTEP AZ series equipped
Pulse input type
USB cable
Built-in controller type
EZSH series αSTEP AR series equipped
Pulse input type
CC05IF-USB
Built-in controller type
EZSH series αSTEP AZ series equipped
Pulse input type
USB cable
Linear actuator
Series name Product type Communication cable type
DRS2 series & alpha; STEP AZ series equipped Pulse input type USB cable
Built-in controller type
DRLII Series Built-in controller type CC05IF-USB
Hollow rotary actuator
Applicable product
https://www.orientalmotor.com.sg/service/softwaredl/mexe02/
Series nameProduct type Communication cable type
DGII series & STEP AR series equipped Pulse input type CC05IF-USB
Built-in controller type
DGII series & STEP AZ series equipped Pulse input type USB cable
Built-in controller type
DGII series RKII series equipped Built-in controller type CC05IF-USB
Network converter
Applicable product
https://www.orientalmotor.com.sg/service/softwaredl/mexe02/
Product type Communication cable type
CC-Link Ver.2 USB Cable
CC-Link Ver.1.1 CC05IF-USB
MECHATROLINK-II
MECHATROLINK-III
EtherCAT

Please read the license agreement before downloading MEXE02.
License Agreement

◆Support Software MEXE02

VersionApplicable Operating SystemsLanguageDownload File
Ver. 3.53 Microsoft Window 10
Window 8.1
Window 8

English

24.7 MB (25,966,440bytes)
Windows 7

English
65.7 MB (68,895,107bytes)
For Windows XP/Vista version, do click here.
· If Microsoft .NET Framework 4 Client Profile is already installed, You can use software for Windows 8 / 8.1 / 10.
* If the root certificate is not up to date, the installation may fail.

Software revision

VersionUpgradedContents
Ver. 3.53 September 2018 Updated to correspond to the latest firmware of AZ series.
Ver. 3.52 June 2018 Equipped Launcher function
Improve operational stability
Ver. 3.51 December 2017 Applicable to the latest firmware of AZ series
Ver. 3.44 June 2017 Improve operational stability
Ver. 3.43 April 2017 Improved operational stability
Ver. 3.42 April 2017 Improved operational stability
Ver. 3.41 November 2016 Microsoft Windows 10 support
Ver. 3.33 June 2016 Applicable to the latest firmware of AZ series.
Ver. 3.32 July 2016 Operation stability improvement.
Ver. 3.31 January 2016 It is in multi-lingual languages.
Corresponds to the new product.
1)αSTEP AZ Series equipped EZSH series
2) αSTEP AZ Series equipped DRS2 series
Ver. 3.12 October 2014 Corresponding to the latest firmware of the AZ Series

Do refer to the Japanese site page for firmware updates history ( https://www.orientalmotor.co.jp/download/software/mexe02_firmware_az/)
Installation Instruction
*Do note
During installation, you must have a personal computer administrator.
- Before installation, please be sure to uninstall the MEXE02 that are currently installed.
(Check your version, help in the software - "version information".)
- If the root certificate is not up to date, you may fail to install.
MEXE02 Installation
When you install the MEXE02, in addition to the MEXE02, USB device drivers and the Microsoft .NET Framework 4
Client Profile is installed.
1. Download the installation program (ZIP file).
2. Extract the downloaded compressed file, (in the case of English MEXE02ENUS folder) MEXE02JA folder Open.
Please expand unzip files as much as possible shallow folder in the hierarchy. Example) C: \ (deployment folder)
3. Setup.exe (the setup program) will trigger.
4. The installation is started, it installed according to the instructions on the screen.
Uninstall Instruction
*Do note
To uninstall MEXE 02, uninstall both MEXE 02 and the device driver. If you are using EZED 2, EZED 3, you do not need to uninstall the device driver. Uninstalling the device driver 1. Remove the communication cable. 2. Uninstall "ORIENTAL MOTOR CO., LTD. USB Driver (x **)" according to the program uninstallation method of your OS. Uninstall MEXE 02 According to the program uninstallation method of your OS, uninstall "Support Software MEXE 02 Ver. ** English Edition" ※.
AZ Sample Program download


Looping programme(10 repetition)
Looping programme(2 motions with 5 & 10 repetitions)

Absoulute wrap proximity programme

* For DGII AZ. Do change setting to 18 (Click here to see image )
Pick and place looping with offset programme


AR Sample Program download


AR_Sample_program_Link2_motion_CW1R_CCW4R_CW13R_CCW10R
AR_Sample_program_Link2_motion_delay_1sec_CW1R_CCW4R_CW13R_CCW10R
AR_Sample_program_Sequential_program_0_to_8

*If you encounter problem using the download sample program, do call us at 1800-842-0280 for assistance.
Alternatively you can also LiveChat us online.