- Accessory
- Motor, Driver, Cable for Motor✽, Cable for Encoder✽, Connector for I/O Signal, Motor Connector, Connector for Regeneration Unit Input/Main Power Input Terminals, Connector for 24 VDC Power-Supply Input/Regeneration Unit Thermal Input/Electromagnetic Brake Terminals, Connector Wiring Lever
✽ The product comes with 3 m cables including a cable for motor, and cable for encoder. If you need cables longer than 3 m or cables offering excellent flexibility, select appropriate cables from the accessories (sold separately).
- Safety Standards
-
| Product Name | Product Leadtime | Unit Price(SGD) | Unit Price(USD) | |
|---|---|---|---|---|
| NX610MC-PS10-3 | Please contact us for more info | 2,303.00 | 1,842.00 |
For better services, Malaysia customers and Thailand customers please contact our Malaysia and Thailand branch.
●Production Information
Current product
●Component Name
NXM610M-PS10(Motor)
NXD20-C(Control Circuit)
| Frame Size | 60mm |
|---|---|
| Shaft/Gear Type | PS Geared Type |
| Electromagnetic Brake | With |
| Included Cable | 3m |
| Rated Output Power | 100W |
| Motor Permissible Speed | 3000r/min |
| Permissible Torque | 2.86N･m |
| Maximum Torque | 8.59N･m |
| Permissible Speed Range | 0～300r/min |
| Rotor Inertia J | 0.0334×10^-4J:kg・m^2 |
| Gearhead Internal Inertia J | 0.0433×10^-4J:kg・m^2 |
| Permissible Load Inertia J | 0.0145J:kg・m^2 |
| Resolution (Motor Shaft) | 100 to 100000P/R |
| Detector | Absolute Encoder 1 rotation 20 bits, multiple rotations 16 bits |
| Backlash | 15min |
| Gear Ratio | 10 |
| Power Supply Input Voltage, Frequency, AC Main Power Supply | Single-Phase/Three-Phase 200-230 VAC −15 to +10% 50/60 Hz |
| Power Supply Input Voltage, DC Control Power Supply | 24 VDC -10~+10% 0.8 A |
| Power Supply Input Rated Input Current | 1.8A *1 |
| Electromagnetic Brake Type | Power off activated type |
| Electromagnetic Brake Power Supply | 24 VDC -10~+10% |
| Electromagnetic Brake Power Supply Input | 6.1W |
| Electromagnetic Brake Power Supply Current | 0.25A |
| Electromagnetic Brake Power Static Friction Torque | 2.86N･m |
| Standard | EN |
| CE Marking | affixed |
| Command Method | Pulse, Analog Speed Command Voltage, Analog Torque Command Voltage |
| Maximum Input Pulse Frequency | 500 kHz (When the pulse duty is 50%) *2 |
| Protective Function | When the following protective functions are activated, an alarm output signal is output and the motor is stopped. Overflow, Overcurrent Protection, Overheat Protection, Overvoltage Protection, Main Power Supply Error, Undervoltage, Motor Overheat Protection, Sensor Error during Operation, Encoder Communication Error, Overload, Overspeed, Position Range Error, Absolute Position Loss, Command Pulse Error, EEPROM Error, Sensor Error during Initialization, Rotor Rotation during Initialization, Encoder EEPROM Error,Motor Combination Error, ABS Not Supported, No Battery, Regeneration Unit Overheat, Electronic Gear Setting Error |
| Mass: Motor | 1.45kg |
| Mass: Control Circuit | 0.9kg |
- ●The gearhead internal inertia is the motor shaft converted value.
●The value for 50 times the rotor inertia.
●The resolution for the motor output shaft.
●These values are for operation in the continuous duty region. For operation in the limited duty region, the maximum current is approximately 3 times the value shown.
●The electromagnetic brake is for holding the position when the power supply is OFF. The electromagnetic brake cannot be used to stop the motor. A separate power supply for the electromagnetic brake is also required.
- *1 Single-Phase 200-230 VAC:1.8A Three-Phase 200-230 VAC:1A
*2 Line driver output by programmable controller
Open collector output by programmable controller: 250 kHz (When the pulse duty is 50%) The values when the separately-sold general-purpose cable (CC36D1-1) is used.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| 2D-CAD | Motor | C247.dxf |
|---|---|---|
| Control Circuit | C209.dxf | |
| 3D-CAD | Motor | C247.step |
| Control Circuit | C209.step | |
| 3D-CAD(web2CAD) | Motor | to web2CAD site |
| Control Circuit | to web2CAD site | |
| Document | CE Declaration of Conformity | CE-6038.pdf |
| UL Certification(Motor) | UL_E336472V2S5.pdf | |
| UL Certification(Circuit) | UL_E171462V4S4.pdf | |
| Catalogue | NX Series | NX Series_a_1.pdf |
| NX Series | NX Series_a_2.pdf | |
| Operating Manual | NX Series Motor | HM-40053JE.pdf |
| NX Series Driver Edition | HM-60051E.pdf | |
| NX Series Driver USER MANUAL | HM-40073E.pdf | |
| Data Setter OPX-2A OPERATING MANUAL Before Use | HM-40142E.pdf | |
| Data Setter OPX-2A OPERATING MANUAL NXSeries | HM-40097E.pdf |
| Dimension |
|---|
|
Motor Control Circuit Cable |
| Characteristics Diagram |
|---|
|
Speed – Torque |
| Other specifications |
|---|
|
Other specifications |