sg  
Accessory
Actuator, Control Circuit, Cable for Motor, I/O Signal Connector, Connector for Main Power Input/Frame Ground Terminals, Operating Manua
● The product comes with a 2 m cable for motor.
If you need cables longer than 3 m or cables offering excellent flexibility, select appropriate cables from the accessories (sold separately).
Safety Standards
 
Product Name Product Leadtime Unit Price(SGD) Unit Price(USD)
DG60-ARAK-2Please contact us for more infoPlease contact us for more infoPlease contact us for more info

You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.

●Production Information

Discontinued product in 1/Apr/2017


●Component Name

DGM60-ARAK(Actuator)
LSD-K(Control Circuit)

Specifications

Motor TypeAR Series
Shaft TypeSingle Shaft
Output Table Supporting BearingDeep-Groove Ball Bearing
Frame Size60mm
Electromagnetic BrakeWithout
Driver TypePulse Input Type
Repetitive Positioning Accuracy±15sec (±0.004˚)
Resolution9000P/R(0.04°/step)、18000P/R(0.02°/step)、90000P/R(0.004°/step)、180000P/R(0.002°/step) *1
Maximum Holding Force - Power ON0.45Nm
Maximum Holding Force - Power OFF0Nm
Lost Motion2 arc minuteute (0.033˚)
Permissible Torque0.9N・m
Inertial Moment J4324×10^-7kg・m^2
Permissible Speed200r/min
Gear Ratio18
Angular Transmission Error4 arc minute (0.067˚)
Permissible Thrust Load100N
Permissible Moment Load2N・m
Runout of Output Table Surface0.030mm
Runout of Output Table Inner (Outer) Diameter0.030mm
Parallelism of Output Table0.050mm
Actuator Degree of ProtectionIP40(IP20 for motor connector)
CE Markingaffixed
Speed and Positioning Control CommandPulse Input
Power Supply Input - Voltage24 VDC±10%
Power Supply Input - Current0.9A
Mass: Actuator0.5kg
Mass: Control Circuit0.17kg
  • ●You can set 1 of 4 resolutions using the resolution select switch or resolution select input.
    The resolution factory setting is 18000 P/R (0.02˚/step).
  • ● Depending on the driving conditions, a considerable amount of heat may be generated by the motor. Be sure to keep the temperature of the motor case at approximately 100˚C max.
    ● The repetitive positioning accuracy is measured at a constant temperature (normal temperature) under a constant load.

Download

The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.

2D-CAD ActuatorD2853.dxf
Control CircuitD2859.dxf
3D-CAD ActuatorD2853-A.step
Control CircuitD2859.step
Document Hollow Rotary Actuator DGII SeriesDGII.pdf
Operating Manual Hollow Rotary Actuators DGIISeries Actuator EditionHL-14053E.pdf
Motorized Actuator Driver DC power input Pulse input type LSD-KHL-14040JE.pdf
Data Setter OPX-2A OPERATING MANUAL Before UseHM-40142E.pdf
Data Setter OPX-2A OPERATING MANUAL DGII Series / EAS Series Built-in Controller TypeHL-14055E.pdf