AR Series Equipped
Product Variation with a Unified Control Method
<Product lines equipped with the the AR Series all have a unified controllability.>
Closed loop stepping motor and driver packages αSTEP AR Series |
Hollow Rotary Actuators DGII Series |
Motorized Linear SlideEAS Series |
Motorized CylindersEAC Series |
Easy Operation by Use of the Data Setting Software
By using the data setting software, data settings and actual operation, and checks by the various monitor functions are also easily performed on the computer.
■ Data Setting Software MEXE02
●Operating Data/ Parameter Setting
The operating data and parameters can be easily set on the computer. The settting data can be saved, therefore the same settings can be forwarded and used in such cases as the driver is replaced.
●Teaching/Remote Operation
The motor can be driven by operating the data setting software. Use this during teaching, test run, etc.
●Various monitoring functions
.●I/O Monitoring The condition of the I/O being wired with the driver can be checked on the computer. Use it to check the I/O condition after wiring and during operation. |
.Waveform Monitoring Similar to using an oscilloscope, the motor drive condition (designated speed, motor load efficiency, etc.) can be checked. Use it during the startup of the device and when adjusting. |
.●Alarm Monitor When a failure occurs, the description and handling measures for the failure can be checked. |
You can select from 2 driver types for the EAS and EAC Series, depending on your host system.
・Built-In Controller Type
・Drive pulse input type
The drive input pulse operated. To prepare the client for the pulse generator control module products.
Copyright 2000 ORIENTAL MOTOR ASIA PACIFIC PTE. LTD.